400/1320N Outdoor Rated Fiber Optic Cable Stranded Loose Tube Single - Steel - Wire Armored

Stranded Loose Tube Single-steel-wire Armored GYTA53+33 Outdoor Fiber Cable

Product details

The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. And a PSP is longitudinally applied over the inner sheath, the cable is covered with a PE outer sheath. After the single-steel armored, the cable is finally completed with an outer sheath.

Characteristics

• Good mechanical and temperature performance
• Single-steel ensures good performance of tensile strength
• High strength loose tube that is hydrolysis resistant
• Special tube filling compound ensure a critical protection of fiber
• Crush resistance and flexibility
• The following measures are taken to ensure the cable watertight:
• Steel wire used as the central strength member
• Loose tube filling compound
• 100% cable core filling
• APL moisture barrier
• PSP enhancing moisture-proof
• Water-blocking material

Standards: IEC 60794-1.

Technical Parameters.

Note:

• Suffix X denotes fiber type.
• The nominal value of the PE outer sheath thickness is 2.0mm. The nominal value of the PE inner sheath thickness is 1.0mm.

Package

OMC offers two types of cable package. Package 1 is usually for indoor, light weight cables. Package 2 is usually for outdoor, heavy weight cables. Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements.